磷酸鐵鋰電池的用途是實現各類小功率通信終端設備的遠程供電的通信用靜止型電源。其重要負載包括微蜂窩、WLAN設備、光纖通信網絡設備、室內分布系統以及室外邊際站、射頻拉遠等。

1、磷酸鐵鋰電池重要技術性能指標：工作溫度：-20℃~+60℃（注：工作溫度范圍內，電池外觀應無變形、無爆裂等現象）充電環境溫度：0℃~55℃；放電環境溫度：-20℃~60℃。貯存溫度范圍：-25℃~+60℃相對濕度：≤85%大氣壓力：70KPa~106Kpa工作電壓：-48V~-56V音頻噪音：<55dB（設備正面1米處）均充充電電壓范圍為（3.55~3.60）V，浮充充電電壓范圍為（3.35~3.40）V保修期：5年，循環壽命應不小于2000次，在網浮充使用壽命，不應低于10年。電池容量為50AH，每組48V內必須有15或16節單體電池組成，有電池管理系統BMS功能。電池自維護：具備電池自動均衡功能；產品應具備監控功能，具有RS232或RS485接口，可接入買方的動力環境監控系統。充放電自動管理：監控單元自動測量電池的充放電電流并對電池進行浮充和均充管理；

2、磷酸鐵鋰電池的性能一致性：

a）電池組內各完全充電電池之間的靜態開路電壓最大值與最小值的差值應不大于0.05V；

b）電池組進入浮充狀態24h后各電池之間的端電壓差應不大于0.20V；

c）電池組放電時，各電池之間的端電壓差應不大于0.25V；

d）電池組內各電池之間容量最大值、最小值與平均值的差值應不超過平均值的士1%。

3、磷酸鐵鋰電池的安全性能要求：過充電安全特性：蓄電池充電后，在（25±5）℃條件下擱置1h。在（25±5）℃條件下以5000mA單體電池電流充電至5V。性能要求：不爆炸，不起火。高溫安全特性：將蓄電池置于（130±2）℃恒溫箱里，并保溫30min。性能要求：不爆炸，不起火跌落安全特性：蓄電池充電后，在（25±5）℃條件下擱置1h后，在（25±5）℃條件下，自4米高處跌落至木板上。性能要求：不爆炸，不起火。外部短路：電池短路時應不爆炸、不燃燒。外部影響：在針刺、擠壓、撞壓、墜落等情況下，電池應不爆炸、不燃燒。

4、磷酸鐵鋰電池要有BMS保護功能

（1）過充電保護電池組具有過充保護功能，檢測到過充狀態時，電池組保護系統應切斷充電電路，電池組應不漏液、冒煙、起火或爆炸，電壓電流撤銷后，電池組能正常工作。

（2）過放電保護電池組任何一節電芯電壓小于過放保護電壓（2.5V，可根據廠家給定值調整）后，電池組保護系統能切斷放電回路。市電恢復后，電池組應自動恢復充電狀態，并正常工作。

（3）短路保護電池組滿電狀態下，電池組的正負極短路時電池組應能切斷電路，電池組應不漏液、冒煙、起火或爆炸，短路撤銷后電池組能正常工作。

（3）反接保護電池的正、負極端子及極性應有明顯標記，需采用插接式機構，防反接設計特性；電池組滿電狀態下，正負極反接時電池組保護系統能切斷電路，電池組應不漏液、冒煙、起火或爆炸，反向電壓撤銷后，電池組能正常工作。

（4）過載保護電池組按規定充滿電后，，當放電電流達到過載保護電流值時，電池組保護系統應能切斷電路，電池組應不漏液、冒煙、起火或爆炸，過載撤銷后，電池組能正常工作。

（5）溫度保護溫度達到保護點范圍（要求高于60度，投標方應供應具體的數據）時，電池組應切斷電路（電池組內部BMS元器件高溫保護除外），溫度達到恢復點范圍時，電池組應自動恢復工作；整個過程電池組應不漏液、冒煙、起火或爆炸。環境可靠性產品應具有良好的溫度適應性，當溫度、濕度發生較大變化時，產品的性能應不受影響。產品應供應詳細的說明。

5、磷酸鐵鋰電池的其他要求

（1）電池表面應清潔、無銹蝕、無劃痕、無變形及機械損傷，無漏液現象，接口觸點無銹蝕；

（2）電池表面應有必須的產品標識，并標明生產日期，產品標識，印刷清晰，且標識清楚，不易脫落；

（3）電池的正、負極端子及極性應有明顯標記，表面光澤，無飛邊毛刺、凹凸不平等缺陷，表面拋光鈍化處理，便于連接，端子尺寸應符合制造商產品圖樣；

（4）電池的通信接口、電源接口等應有明確的中文標識并符合制造商產品圖樣；

（5）電池的外形尺寸應符合制造商產品圖樣或文件規定；

（6）應采用先進的連接緊固方式，確保蓄電池組內部單體電池之間連接的可靠性。

（7）如并聯電池組，電池間的連接電纜應采用銅質電纜，電纜線徑應滿足安全載流量的要求。